19K MOS-T

This course is structured into a "Distance Learning" Phase I and "resident" Phase II. The course is performance oriented and designed to qualify individual students in the 19K MOS. Upon completion, the student will be able to perform the tasks necessary for skill level 1 proficiency.

Course Scope

The 19K MOS-T Phase I for TY08 is taught in 2 modes. If you enroll in class 001 it is a NON-RESIDENT (done from home, office, library etc…) distance learning class that is expected to be taken within 6 months of phase II. The other Phase I option is a 5 day dL class conducted in Resident mode at the 1-204th RTI(AR). Phase 1(dL) is a Web based distance learning course that is hosted by the UNIVERSITY OF MOUNTED WARFARE through the Learning Management System at Ft. Knox KY. The University of Mounted Warfare log-in is pulled from Army Knowledge Online, it is imperative that you are able to log-in to AKO with your current Username and Password.

The 19K MOS-T Phase II is 16 days in duration with day 1 and 16 scheduled as travel and processing. The course is performance oriented and designed to qualify individual students in MOS 19K, (skill level 10). There are approximately 140 hours of training with the majority conducted as hands on practical exercises.

Course Prerequisites

Soldier must have completed Basic Training as a member of any US Military Service (Active or Reserve Component), must meet the requirements prescribed in DA Pam 611-21 for MOS 19K (Min Physical PLUHES-111121) (Max HT-73”) (ASVAB-CO 90) (AHRC), rank PVT(E-1) through SFC(E-7) or have an approved OCOA waiver, and must be qualified in an MOS other than 19K.

Phase 1 (dL) must be completed before taking Phase 2. Solders have up to 6 months to complete the Phase I (dL), a Phase 2 registration is required in ATRRS to identify the 6 month window. Soldier must complete the two phases of the course within one year from registration in ATRRS.

19K MOS-T Phase I Trained Subjects

MAP READING

• Identify Topographic Symbols
• Identify Terrain Features On A Map
• Determine the Grid Coordinates of a Point on a Map
• Determine the Elevation of a Point on the Ground
• Measure Distance on a Map
• Determine a Magnetic Azimuth using a Compass
• Orient a Map using a Compass

URBAN OPERATIONS

• Enter A Building During An Urban Operation
• Clear a Building
• Perform Movement Techniques
• Prepare Individual and Crew-Served Positions
• Select Hasty Firing Positions

ARMOR CREWMAN SKILLS

• Use Visual Signaling Techniques
• Recognize Armored Vehicles and Aircraft
• Estimate Range
• Adjust Indirect Fire
• Maintain Operator's Part of Equipment Record Folder
• Operate Night Vision Goggles AN/PVS-7
• Maintain Night Vision Goggles AN/PVS-7
• Operate Automated Net Control Device (ANCD)

DRIVER SKILLS

• Perform Driver's Before-Operation Checks
• Perform Driver's After-Operation Checks
• Secure the Driver's Station on an M1A1 Tank
• Troubleshoot Using the Driver's Control Panel
• Prepare for Power pack Removal

GUNNER/LOADERS SKILLS

• Prepare The Gunner's Station For Operation
• Secure the Gunner's Station
• Perform Loader's Before Operation Checks
• Perform Loader's After Operation Checks
• Perform Misfire Procedures on an M1 Series Tank
• Inspect 120mm Ammunition for Serviceability

19K MOS-T Phase II Trained Subjects

• Maintain and Operate the AN/PVS-7B/D Night Vision Goggles and AN/PVS-14 Monocular Night vision device
• Prepare the Drivers Station for Operation on an M1A1 Tank
• Start/Stop the Engine on an M1A1 Tank
• Extinguish a Fire on an M1A1 Tank
• Slave Start an M1A1 Tank
• Secure Driver's Station on an M1A1 Tank
• Inspect Hydraulics on an M1A1 Tank
• Service the Air Induction System and Pre cleaner on an M1A1 Tank
• Remove/Install Track Blocks on an M1A1 Tank
• Troubleshoot the M1A1 Tank using Driver's Control Panel Warning and Caution Lights
• Perform Operator Maintenance on an M240 Machine Gun
• Prepare/Secure Loader's Station on an M1A1 Tank
• Operate SINCGARS Radio's with intercom
• Stow Ammunition on an M1A1 Tank
• Load/Unload the 120mm Main Gun on an M1A1 Tank
• Load/Unload an M250 Grenade Launcher on an M1A1 Tank
• Perform Operator's Maintenance on the 120MM Breech Assembly on an M1A1 Tank
• Operate the NBC System on an M1A1 Tank
• Prepare Gunner's Station for Operation on an M1A1 Tank
• Secure the Gunner's Station on an M1A1 Tank
• Evacuate a Wounded Crewman from an M1A1 Tank
• Emergency Crew Evacuation Procedures
• Maintain a Caliber .50 M2HB Machine Gun with M10 Charger
• Mount/Dismount a Caliber .50 M2 HB Machine Gun on an M1A1 Tank
• Clean/Service the 120MM Main Gun on an M1A1 Tank
• Main Gun Misfire Procedures on an M1A1 Tank
• Main Gun and Coax Machine Gun Engagement Procedures
• Bore sight an M1A1 Tank
• Reduced TCGST
• Drive an M1A1 Tank
• Tow an M1A1 Tank
• Refuel an M1A1 Tank
• Main Gun and Coax Live Fire Range
• Recognize and react to IEDs and land mines
• Conduct urban operations
• Drive an M1A1 tank in a tactical environment
• Conduct urban operations